Core 2.1 Atomizer

Crossing Core 2.1 V5 Atomizer

The 3D coil running through the ceramic allows for more even heating of the ceramic surface when compared to normal bucket atomizers. This is an OEM replacement part for the 2.1 Core E Rig. Compared to the standard 2.0 V5 atomizers, this is non-rebuildable.

• Save time on swapping your Core 2.0 ceramics with screwdrivers by using this option which is simply replaced once it’s lifespan is over.

If you’re upgrading your Core 1.0, you’ll be sure to enjoy the ‘3D’ heating of this atomizer, as it has coils embedded into its side and bottom to make sure your dab melts and vaporizes evenly, especially when using Ruby Terp Pearls and rotating the carb cap back and forth.

How to maintain Core 2.1 Atomizers?

A few minutes after every session, it’s a good idea to wipe away leftover resin by using an Isopropyl Q-Tip before your next session to make sure nothing gets burnt. If you do begin to notice burnt resin on the atomizer, you can unthread it from the base an soak it in isopropyl alcohol for 15 minutes before a rinse off. Make sure to let it fully dry before using it again. While the atomizer is unthreaded, you can also use a Q-tip on the threading, where there might be an oil buildup.

Core 2.1 Atomizer Compatibility

You’ll be able to use this atomizer by Crossing Tech on these E-Rigs:

• The Core 1.0 
• The Core 2.0 
• The Core 2.1

Shenzhen Crossing Tech Accessories

• The Core Quartz Bucket and Coil
• The Core Titanium Bucket and Coil
• The Core Triple Titanium Coil
• The Core Glass Bubbler
• The Core Side Mouthpiece Glass Bubbler

What's in the box

• 1 x Core 2.1 3D Ceramic Atomizer