Pulsar 510 Delta Wax Atomizer

Buy Pulsar 510 Delta Ceramic Wax Atomizer

The Pulsar 510 Delta Ceramic Wax Atomizer is a direct replacement part for your Delta 3-in-1 wax vaporizer. It uses the same full ceramic chamber design Pulsar originally shipped with the device. Installation is simple, with no tools required.

Compatibility

• Pulsar 510 Delta 3-in-1 Vaporizer Kit

Key Features

Full Ceramic Chamber with Sidewall Heating

This atomizer uses a full ceramic chamber with heating built into the sidewalls. The sidewall heating helps melt concentrate evenly throughout the ceramic chamber. This helps your wax melt smoothly at any temperature setting, and gives you consistent flavor.

Auto-Detected Temperature Mode

Once you screw the atomizer onto your Pulsar Delta, the device automatically recognizes it and switches to temperature mode. You get three color-coded settings: 

• Green for 400°F (205°C), 
• Blue for 500°F (260°C), and 
• Red for 600°F (315°C). 

The device vibrates and shows a green light once it recognizes the atomizer connection. The different LED colors then indicate the selected temperature.

Ceramic Carb Cap & Adjustable Airflow

The silicone mouthpiece includes a ceramic carb cap that helps control airflow and minimize splashback. Two adjustable airflow intakes let you open the draw for more airflow or close it for a tighter pull.

Sub-Ohm Design for Pulsar 510 Smart Devices

This atomizer uses a proprietary sub-ohm resistance built specifically for the Delta’s smart detection system. The sub-ohm atomizer is designed for the Delta Vaporizer. It isn’t a universal fit for other wax pens.

Original Pulsar Replacement Part

This is an original Pulsar replacement atomizer made for the 510 Delta. It matches the original ceramic wax atomizer included with the device, so you get the same fit and compatibility.

How to Replace the Pulsar 510 Delta Wax Atomizer

1. Unscrew the old atomizer from your Delta battery.
2. Thread the new ceramic wax atomizer into place until snug. Do not overtighten.
3. Detach the silicone mouthpiece and add a small amount of concentrate, about the size of a grain of rice, directly into the ceramic chamber.
4. Reattach the mouthpiece. The Delta will automatically switch to temperature mode.
5. Press the power button one time to cycle through the three temperature settings, and stop on your preferred color.
6. Double-click the button to begin the preheat/session cycle, then inhale once the device reaches temperature.

How to Clean the Pulsar 510 Delta Wax Atomizer

1. Turn off the device and let the atomizer cool until it is warm enough to touch.
2. Detach the silicone mouthpiece and wipe it separately with an ISO cleaning wipe.
3. Wipe the ceramic chamber with an ISO cleaning stick or a cotton swab dipped in isopropyl alcohol.
4. For a deep clean only, Pulsar recommends soaking the coil and carb cap in isopropyl alcohol for up to 1 hour. However, ensure that all parts are fully dry before using them again to avoid damaging or cracking the ceramic.
5. Allow every part to dry fully before reassembling and using the device again.

Replace Your Delta’s Wax Atomizer Today!

The Pulsar 510 Delta Ceramic Wax Atomizer is a genuine replacement part built for the Delta 3-in-1 wax vaporizer. Order it today from Tools420 and get your replacement delivered fast.

What's in the box

1 x Pulsar 510 Delta Ceramic Wax Atomizer