Pulsar 510 DL 6.0



The Pulsar 510 DL 6.0 is an auto-draw 510 thread battery with a concealed cartridge design and fine voltage adjustment. It has a 1000mAh USB-C rechargeable battery, adjustable airflow, and a wraparound LCD with Stealth Mode.
Product Specifications
| Manufacturer: | Pulsar |
|---|---|
| User Level: | Beginner |
| Material Compatibility: | 510 Cartridges |
| Heating System: | Single 510 Thread |
| Heat Up Time: | Instant (0–5 sec) |
| Charging Port: | USB-C |
| Display: | Yes |
|---|---|
| Warranty Period: | 6 months (manufacturer warranty) |
| Battery Size: | Over 650mAh |
| Swappable Battery: | No |
| Device Size: | Medium |
| Ease of Cleaning: | Easy |
Contents
Buy Pulsar 510 DL 6.0
The Pulsar 510 DL 6.0 is an auto-draw 510 thread battery with a concealed cartridge design and fine voltage adjustment for easy, everyday control.
Key Features of the Pulsar 510 DL 6.0
- Adjustable Voltage: 1.8V to 4.2V in 0.1V steps for precise control.
- 1000mAh Battery: Built-in power with USB-C recharging.
- Auto-Draw Activation: Inhale to fire it. No button holding.
- 8-Second Preheat: Warms the cartridge at 1.8V before use.
- Animated LCD Display: Full-color graphics with the current voltage and battery percentage.
- Stealth Mode: Turns the screen off while everything else keeps working.
- Enclosed Cartridge Housing: Fits most 0.5g to 3g cartridges, up to 18mm wide and 51mm tall.
- Adjustable Airflow Slider: Changes draw resistance from the bottom of the device.
- Magnetic Bottom Connector: Removable for easy access to the cartridge connection.
Precise Voltage Control
The DL 6.0 gives you 1.8V to 4.2V in 0.1V steps. Press the button once to raise the voltage by 0.1V, or press and hold to move faster and release at the one you want. After 4.2V, one more press takes you back to 1.8V.
However, the precise voltage control changes the whole session as vapor depends on the selected voltage. High voltage gives dense, thick clouds, and it works best with short puffs for quick, discreet hits. Conversely, low voltage gives lighter, wispy vapor that is less potent, and it suits longer puffs.
Auto-Draw and Preheat
The 510 DL 6.0 by Pulsar is also designed in such a way that there is no button to hold while you inhale from the vape pen. Pull on the mouthpiece and the device starts a 10-second session timer. To warm the cartridge before you draw, press the button twice to start the 8-second preheat at 1.8V. You can stop it early by pressing the button or inhaling.
Handles Clogged Cartridges
In most cases, carts often clog halfway through their life as residue builds up. However, the DL 6.0 melted the oil quickly and handled a clogged cart better than all 510 batteries available in market. The cart did not feel restricted, and there was no need to heat it first. This is made possible due to the strong 1000mAh battery.
Flavor and Vapor
Vapor also changes with voltage, and high settings give dense clouds. The flavor is simply okay. If flavor is your top priority, it is important to keep this in mind.
Wraparound Animated Display and Stealth Mode
Full-Color Wraparound LCD: Covering more than half of the device’s body, the bright wraparound screen displays real-time readouts for your exact voltage setting, and battery percentage. It also shows an animated topographic map and night sky graphic that fills up incrementally during the 8-second preheat countdown.
Stealth Mode: Press the power button 3 times within 1.5 seconds to turn off the screen completely while keeping all vaping functions active. Even in Stealth Mode, the lightning bolt charging icon and battery percentage will still appear on the display when the device is plugged in.
Cartridge Compatibility and Airflow
Also, the cartridge sits fully inside the body. The DL 6.0 takes 510-threaded cartridges up to 0.7 x 2 inches (18 x 51 mm), which covers most 0.5g to 3g sizes. The airflow slider sits at the bottom, opposite the charging port, and this makes a noticeable difference, though not a big one. Sliding it open gives a noticeably looser, airier pull, while closing it down creates a tighter, more restricted draw.
Battery, Charging, and Connector
The Pulsar 510 DL 6.0 also features a 1000mAh battery, which provides reliable performance between charges, with USB-C charging for convenient recharging. The 1000mAh remains a good fit for 2ml and 3ml carts, which may be why Pulsar chose it. The bottom magnetic connector comes off so you can reach the cartridge connection. This makes cartridge changes and cleaning easier.
Size and Portability
The DL 6.0 510 thread battery measures 3.68 x 1.95 x 1.07 inches (93.5 x 49.5 x 27.3 mm). According to the manual, the size is discreet and can easily fit in the palm of your hand. It is on the larger side for a 510 battery, but that size is what holds the 1000mAh battery.
How to Use the Pulsar 510 DL 6.0
- Charge the device with a USB-C cable until the screen shows 100%.
- Attach a 510-thread cartridge to the bottom magnetic connector and snap it onto the device. The screen turns on when the cartridge connects properly.
- Press the button 5 times quickly to turn the device on.
- Set your voltage. Press once for each 0.1V step, or press and hold to cycle, then release at your setting.
- To warm the cartridge first, press the button twice to start the 8-second preheat.
- Inhale from the mouthpiece. Auto-draw starts the 10-second session timer.
- Slide the airflow switch at the bottom to change the draw.
- To use Stealth Mode, press the button 3 times within 1.5 seconds. Repeat to turn the screen back on.
- To turn the device off, press the button 5 times quickly.
If the screen flashes 3 times, and no cartridge is detected, the device goes into standby mode. If it flashes 4 times, the cartridge resistance is below 0.8 ohms and the device powers off.
How to Clean the Pulsar 510 DL 6.0
- Remove the bottom magnetic connector.
- Wipe the inside and outside of the connector with ISO cleaning sticks or wipes.
- Clean the 510 connector and air pathway with ISO cleaning sticks. Move in a circular motion until no oil remains.
- The mouthpiece does not come off, so clean it with an ISO cleaning stick.
- Do not put any part in cleaning liquid. Let everything air dry before you put it back together.
Who Is the Pulsar 510 DL 6.0 For?
- Large cartridge users who want a battery that suits 2ml and 3ml carts.
- People with clogged carts who want a battery that clears them without extra heating.
- Users who like control and want to tune voltage in 0.1V steps.
- Discreet users who want Stealth Mode and a palm-size device.
Shop the Pulsar 510 DL 6.0 Today
The Pulsar 510 DL 6.0 gives you big battery power, fine voltage control, and strong results with clogged carts. Buy the Pulsar DL 6.0 from Tools420 today and enjoy fast shipping.
What's in the box
- 1 × Pulsar 510 DL 6.0 battery
- 1 × bottom magnetic connector
Cartridge sold separately.
Pulsar 510 DL 6.0
Product Q&A
There are no questions yet.










Reviews
There are no reviews yet